PTFE Filament Guide for the Original Prusa i3 MK2 by Sunbart Download

Prusa Filament Guide. Filament Guide addon (MK4) Prusa Knowledge Base The person who made the adapter also provided an stl for a little plastic loop, mounted in the hex hole on top of the Z axis, to guide the filament over the Z axis tower and down to the extruder. So, habit needs to be to unload filament at the end of each day, because if you forget, you'll only have to re-thread it the next time you use it anyway.

Long story short - with our filament guide you'll never again hesitate whether the selected filament is suitable for your needs I prefer to have my filament feed directly from my filament dryer instead of the top using the top mounted spool holders

Prusa I3 MK3/MK3S/MK3S+ filament guide by e1miran Download free STL

The person who made the adapter also provided an stl for a little plastic loop, mounted in the hex hole on top of the Z axis, to guide the filament over the Z axis tower and down to the extruder. From my experience, filament doesn't like to be bent for long periods (fine during printing, but less so when left overnight or for a few days) - the stresses shatter the filament Basic info PETG is one of the most easily printable materials, it is inexpensive and.

Prusa MK4 Filament guide 90° by vintrlos Download free STL model. The person who made the adapter also provided an stl for a little plastic loop, mounted in the hex hole on top of the Z axis, to guide the filament over the Z axis tower and down to the extruder. I've created it based on the STL and it's 100% identical to the original

Filament Guide addon (MK4) Prusa Knowledge Base. The materials used for FFF 3D printing are mostly hygroscopic We believe that it will help you avoid a lot of trouble and extra costs.