New Honda GX340 11HP Cylinder Head Valves & Springs Guide Plate Free H

Honda Gx340 Valve Clearance. Intake Exhaust Valve Spring Retainer Set For Honda 11HP GX340 13HP The Honda GX340 K1 has overhead valve design, single-cylinder inclined by 25°, transistorized magneto ignition system and horizontal carburetor with a butterfly valve. You need to check and adjust valve clearance because these components wear slightly with use and the clearance may fall out of the specified range resulting in excessive wear (not enough

Turn the rocker arm pivot to obtain the specified clearance. Valve clearance: Intake valve: 0.15 ± 0.02 (0.006 ± 0.001) Exhaust valve: 0.20 ± 0.02 (0.008 ± 0.001) Carburetor: Main jet: Externally vented carburetor bowl: #88.

GX340 coil adjustment comment. YouTube

Valve clearance (cold) IN: 0.15 0.02 mm EX: 0.20 0.02 mm: See your authorized Honda dealer: Other specifications : No other adjustments needed Turn the crankshaft and set the piston at top dead center of the compression stroke (both valves fully closed). Standard valve clearance: 0.15 mm ± 0.02 mm (IN) 0.20 mm ± 0.02 mm (EX) ・To increase valve clearance: screw out

Honda Engines GX340 4Stroke Engine Features, Specs, and Model Info. Insert the thickness gauge between the rocker arm and valve to measure valve clearance BELOW IS THE SECTION FROM THE HONDA GX270 & GX340 OHV REPAIR MANUAL

Honda Engines GX340 STP ENGINE, JPN, VIN GC051000001 TO GC051469766. VALVE CLEARANCE 0.20 ± 0.02 mm (EX)0.15 ± 0.02 mm (IN) PIVOT To increase valve clearance, screw out GX240・GX270・GX340・GX390 Engine Adjustment Information VALVE CLEARANCE NOTE: Valve clearance inspection and adjustment must be performed with the engine cold